Article citations Gerward, L., Guilbert, N., Jensen, K.B. And Levring, H.
Abstract Not Available Bibtex entry for this abstract Preferred format for this abstract (see Preferences): Find Similar Abstracts.
(2004) WinXCom—A Program for Calculating X-Ray Attenuation Coefficients. Radiation Physics and Chemistry, 71, 653-654. Has been cited by the following article: • TITLE: AUTHORS:, KEYWORDS:,,,,,,, JOURNAL NAME:,, February 26, 2016 ABSTRACT: In this work, the Styrene-butadiene rubber (SBR)/lead oxide and the Styrene-butadiene rubber (SBR)/lead nitrate composites were prepared as gamma-radiation shielding materials. The investigated materials were prepared with three different weight percentage of lead oxide and lead nitrate (30, 50 and 70 wt%).
The mass attenuation coefficients (μm) for all composite samples were measured experimentally at 511 and 661.6 keV photon energies. The measurements were made by performing transmission experiments with a 3' × 3' NaI (Tl) scintillation detector, which had an energy resolution of 7% at 0.662 MeV for the gamma-rays from the decay of 137Cs.
The effective atomic numbers (Zeff) and the effective electron densities (Neff) were determined experimentally. Battle of midway. Also they were determined theoretically using the obtained μm values for the studied composites samples by WinXCom program. The obtained results show that the experimental values of the composites are found to be in a good agreement with the theoretical values. It is recognized that the mass attenuation coefficient (μm), effective atomic numbers (Zeff) and the effective electron densities (Neff) are increased in the composite samples which contain lead oxides than which contain lead nitrates. Finally, the Styrene-butadiene rubber (SBR)/lead oxide is better than Styrene-butadiene rubber (SBR)/lead nitrate polymer as gamma radiation shielding.